Advertisement
Attach the short ½" hose with the loose zip tie to the block
breather port under the AC compressor as shown. Secure
the short hose with the zip tie and trim the excess.
47. Route the long portion of the ½" breather hose along
the firewall to the top ½"port on the AOS as shown. Secure
the hose with a zip tie at the port and onto the small AC
line at the fire wall. Trim the excess off the zip ties.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
33
Advertisement
