Operation - Uniden Guardian G710PTZC Quick Start Manual

STEP 2. Run the cable up from the camera and through the bracket.
STEP 3. Secure the camera to the bracket with the included bolts.
WARNING! Do not allow the camera cable to be subject to
pinching, tight bends or other severe constriction as part of its
final installation position as this can damage the cable over time
leading to signal loss or potential fire hazard.
Take precautions to ensure a clear work area below the camera
mounting point during installation as a falling camera can cause
injury or damage.
WHICH CABLE TO USE?
Your cabling needs will depend on the distance between your camera and
DVR. There are several cables to fit specific needs and may be purchased
from the your vendor/retailer.
To maintain video quality:
Using better cables always enhances video quality. Always check state and
local laws before installing cameras.
To prevent video signal loss, run one continuous cable between the camera and DVR for best results. If more length is required,
use the minimum number of inter-connection points possible.
Other notes:
If a cable run exceeds 800ft, we recommend using RG-6 coaxial cable which is available at most retail building supply
companies.
If your home or business is pre-wired with CAT-5 cable, then you can run up to 1000ft.

OPERATION

You can control your PTZ camera via the Uniden Guardian app or web application. Simply type your IP address to access the
login screen.
2.
3.
11