Planet VC-231GP User Manual page 16

Refer to the following procedure to set up the VC-231G/
VC-231GP LAN to LAN connection.
1. [LAN1] Set the VC-231G at LAN 1 to CO mode from the DIP
switch.
2. [LAN2] Set the VC-231GP at LAN 2 to CPE mode from the
DIP switch.
3. Power on the VC-231G CO and VC-231GP CPE at both sides
by connecting its power source.
4. Power LED will illuminate.
5. Connect VDSL line from another VDSL device to RJ11 VDSL
port of the VC-231G/VC-231GP.
6. VDSL LNK LED will blink to illuminate at the VC-231G/
VC-231GP.
7. Connect telephone to the RJ11 Phone port of the VC-231G/
VC-231GP.
8. Connect the VC-231G/VC-231GP Ethernet LAN port to other
network device via regular Cat.5 UTP cable.
16