WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the palm-rest and antenna assembly.
2
Replace the two screws (M2x4) that secure the fan to the palm-rest and antenna assembly.
3
Connect the fan cable to the system board.
4
Adhere the tape that secures the fan cable to the system board.
Post-requisites
Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
Replacing the fan
After working inside
www.dell.com/
Replacing the fan
11
25