WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Disconnect the battery cable from the system board (applicable only if not disconnected earlier).
2
Remove the two screws (M2x4) that secure the battery-cable bracket to the palm-rest and keyboard assembly.
3
Remove the battery-cable bracket from the palm-rest and keyboard assembly.
4
Disconnect the battery cable from the system board.
20
Removing the battery
computer. After working inside your computer, follow the instructions in
Removing the battery
www.dell.com/
8
After working inside