WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly.
2
Remove the seven screws (M2x6) that secure the base cover to the palm-rest and keyboard assembly.
3
Using your fingertips, pry up the base cover to release the tabs from the slots on the palm-rest and keyboard assembly.
14
Removing the base cover
Removing the base cover
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
6