Polling A Remote Machine - Samsung SCX-1150F User Manual

8
N
mode, the product automatically switches to FAX mode (automatic
receiving) when set to be polled.

Polling a Remote Machine

Your product polls a remote fax machine and retrieves a document,
which is stored in memory and then prints. The method lets you
perform polling reception when telephone-line rates are at their
lowest.
1
2
3
4
5
5.36 FAX
When all pages are scanned, press Cancel/Reset when the
display shows "NEXT GO ON?."
The product returns to Standby mode and the display shows a
reminder that TX Poll is set.
:
If you have previously set the receive mode to other than FAX
OTE
Press OHD and enter the number of the remote machine.
When you hear a fax tone from the remote machine, press
Setup. The display shows "TO RX ROLL PRESS ENTER."
Press Enter. The display asks you to enter a 4-digit poll code.
Poll code is preset to 0000 at factory. 0000 represents no
code.
If the remote machine is secured with a Poll code, you must
enter the correct code and then press Enter.
Or
If the remote machine is not secured with a Poll code, just
press Enter to accept "0000" which represents on code.
Your product starts to receive the document from the remote
machine.