Setting Paper Size And Type; Paper Size - Samsung SCX-1150F User Manual

Setting Paper Size and Type

First make sure you have paper loaded, following the instructions
in "Loading Paper" on page 1.11. Then you have to set the paper
size and type using the operation panel buttons.
N
In PC printing mode, you have to select the paper type and size in the
application program you use.

Paper Size

After loading paper, take the following steps to set the paper size
from the operation panel:
1
2
3
4
5
N
output tray. If you do, a paper jam may occur.
3.2 Copy
:
These settings are applied to the stand-alone copy mode only.
OTE
Press Setup. The display shows "1.SYSTEM SETUP" on the
bottom line.
Press the Scroll buttons (
SETUP" and then press Enter.
The first copy setup menu "PAPER SIZE" appears on the
bottom line. Press Enter.
The current setting is tagged with a
display on the bottom line.
Press the Scroll buttons (
size you are using in the display.
Press Enter to save the selection.
:
When you use legal-size paper, do not pull out the paper
OTE
or ) until you see "3. COPY
at the end of the
or ) until you see the paper