Samsung SCX-1150F User Manual page 130

1
Feed the document(s) to be faxed face up into the ADF until
"DOCUMENT READY" appears in the display.
Or
Place a single document on the document glass face down
then close the cover. For details on loading original
document(s), see page page 3.3.
2
You can adjust the resolution and the contrast to suit your fax
needs. For details, see page page 5.4.
3
Press Setup. The display shows "1.SYSTEM SETUP" on the
bottom line.
4
Press the Scroll buttons (
"4.ADVANCED FAX" and then press Enter. The display shows
the first advanced fax feature "BROADCASTING" on the
bottom line.
5
Press the Scroll buttons (
POLLING" on the bottom line and then press Enter.
The display asks you to enter a 4-digit poll code. The poll code
is preset to 0000 at the factory, which represents no poll
code.
6
If you want to use a poll code, enter the desired 4-digit code
(except for 0000) and then press Enter.
Or
If you do not want to secure the transmission with a poll code,
press Enter when the display shows "0000" for the poll code,
or enter 0000.
7
The product stores the document in the memory.
The display counts the number of pages being stored in the
memory and the memory capacity remaining.
If the document is fed from the document glass, the display
shows "NEXT GO ON?" on the top line after the document is
scanned into the memory. If you have the next page, remove
the scanned page and load the next page on the glass and
press Enter. Repeat as necessary.
or ) until you see
or ) until you find "SEND
FAX 5.35