Table of Contents
Advertisement
02-Operating
3/2/00 9:36 AM
Page 25
The remote control panel dialog box includes 7 tabs.
PRINTER
• Timeout
Determines the amount of time in seconds the printer waits before
printing the last page of a print job that does not end with a
command to print the page.
• Power save
Determines the length of time the printer waits after a job is printed
before it goes to a reduced power state. If the printer is used
constantly, select OFF which keeps the printer ready to print with
the minimum warm-up time. This uses more energy to keep the
printer warm and ready to print.
• Auto continue
Determines what action the printer should take when a manual feed
print job is sent to the printer and there is no paper in the manual
feeder. If set to ON, the printer will pick up the paper from the
automatic feeder after ten seconds. Otherwise, the printer will wait
for you to load paper in the manual feeder.
• Jam recovery
If paper jams as it exits to the output bin, the data on the jammed
page will be lost. If you set this feature to ON, the printer keeps the
image for a printed page until the printer signals that the page has
successfully exited the printer. The printer reprints all jammed
pages. With this feature OFF, the printer does not reprint a page
that has jammed.
• Econo mode
To get the most from your toner supply, set this mode to ON. With
this mode ON, print quality may be reduced.
PAGE
• Paper size
Sets the paper size.
• Copies
Sets the number of copies printed for each page.
• Orientation
Determines how the printing is oriented on the page.
• Paper type
Allows you to specify the type of print material installed in each
paper source.
Operating your printer
2.23
Advertisement
Table of Contents
