Table of Contents
Advertisement
02-Operating
3/2/00 9:35 AM
2.2
Operating your printer
Page 4
Button function
Function
Toggles the printer between on-line (READY light
On-line/Off-line
on) and off-line (READY light off) status.
When you select `Manual Feeder' source in the
Manual feed start
printer driver's properties, you should press the
button each time you feed a sheet of paper
manually. See page 2.8.
Press the button to turn the printer off-line. With
Reset
the READY light off, press and hold down the
button until all lights are blinking, then release
the button. The printer clears all data from the
printer's memory, and then restores the default
settings. See page 3.1.
With the printer on-line , press and hold down
Self-test
the button until all three lights are blinking, then
release the button. A demo page will be printed.
See page 1.11.
While the printer is on-line, press and hold down
Toner cartridge
the button until all three lights remain lit and the
cleaning
printer starts feeding paper, then release the
button. One sheet with the toner particles on the
cartridge will be printed out.
Usage
Advertisement
Table of Contents
