Table of Contents
Advertisement
02-Operating
3/2/00 9:36 AM
Page 7
• For transparencies:
- Hold the transparencies by the edge and avoid touching the
print side.
- Fan the stack of transparencies to prevent feeding failures.
Be careful not to scratch or leave fingerprints on the print side.
3. Load the print material in the automatic paper feeder without
overloading. Do not mix different types of material. Read the
instructions below on how to load each type of material.
• Load paper or transparencies with the print side facing you.
Place the print side facing you.
Operating your printer
2.5
Advertisement
Table of Contents
