Table of Contents
Advertisement
02-Operating
3/2/00 9:36 AM
Page 21
Basic tab
Menu Option
Copies (1-999)
Paper orientation
Paper size
Paper source
Paper type
Graphic tab
Menu Option
Resolution
Toner save mode
Functions
Sets the number of copies to be printed for each
page.
Sets the orientation (printing direction) of the
print media. Select Landscape to run the
printing parallel to the short edge of the print
material. Select Portrait to run the printing
parallel to the long edge of the print material.
Allows you to set your printer's default input
tray or option. The default selection is Automatic
Feeder. Select Manual Feeder when manually
feeding a sheet of print material through the
manual feeder. For information on the manual
feeder, see page 2.8.
Sets the print media size. The list box provides a
summary of all the paper sizes supported by the
printer driver and printer combination.
Selects the type of print material, like Plain
Paper, Envelope, Transparency and so on
installed in each paper source. If you use thick
paper, set this to Bond. If you use card paper, set
this to Card Stock. If you use colored paper
having pigment or dyes as a part of the paper
manufacturing process, set this to Colored
paper. Select Letterhead for the paper having
preprinted logo or text located at the top of the
page, Preprinted for forms having some type of
printing on them before they are sent through the
printer.
Functions
For best results, set this to 600 dpi. For faster
printing and smaller memory requirements (and
a lower quality), use 300 dpi instead.
When this box is checked, the printer uses less
toner to print the document. The output is a little
lighter but the life of the toner cartridge is
extended.
Operating your printer
2.19
Advertisement
Table of Contents
