01-Setup 7/20/99 9:25 AM Page 2 Control Locations and Functions Front View Used to feed a single sheet of paper. Stacker Extender Supports paper stacked in the paper output bin. Face-down Stacker Holds printed documents. If printed on plain paper, a maximum of 100 sheets can be held.
02-Printing 7/16/99 6:30 PM Loading a Stack of Paper For best results, use high quality 75g/m 1. Pull the extender on the automatic paper feeder up, until it stops. 2. Before loading the paper, flex the sheets back and forth to loosen them, then fan them.
Page 4
02-Printing 7/16/99 6:30 PM Page 3 4. Adjust the paper guides to the width of the paper. 5. Pull up the extender on the face-down stacker. The face-down stacker can hold up to 100 printed pages. Set Up...
Page 5
02-Printing 7/16/99 6:30 PM 6. ML-5000A users may want to print a self test to check that the printer is working properly. A self test shows current printer configuration. Make sure that the READY light is on. Press and hold the button for about 3 seconds.
If Windows does not automatically run the CD-ROM,go to the sectionÓIf Windows Does Not Run the CD-ROMÓ on page 16. 3.Click on the icon ÒPrinter Set-upÓ to install the printer drivers. 4.Click the Item you want to install. 5.Follow the instructions on the screen.
Page 7
2.From the Program Manager window,double-click Main, and File Manager 3.From the File Manager window,select your CD-ROM drive, execute print16.exe. 4.Click on the icon ÒPrinter Set-upÓ to install the printer drivers. 5.Follow the instructions on the screen. Set Up Page 6...
02-Printing 7/16/99 6:30 PM Installing DOSRCP Utility For DOS Users DOS users should install the Remote Control Panel utility to change print settings. 1. Insert the setup CD-ROM into your CD-ROM drive. 2. At the DOS prompt, type in: 3. Specify directory: 4.
Uninstall Printer Driver In Windows 95/98 1. From the Start menu, select Settings, then Printers. 2. In the Printers windows, select Samsung ML-5000A PCL5e. 3. From the File menu, select Delete. In Windows 3.x 1. Double-click the Control Panel icon within the Main program group.
2. Choose Print or Print Setup from the File menu. 3. Make sure the correct printer is selected as your default printer. 4. Click on Properties, Setup or Options if you want to make any adjustments as appropriate for printing your document.
OK button. 5. From the Start menu, select Settings, then Printers. 6. Double-click your printer icon (Samsung ML-5000A PCL5e). 7. From the Printer menu, select Properties. 8. Press the Details tab, select the printer port, then press OK button.
¥ IBM or compatible with a 386 or higher processor ¥ Windows 95, Windows 98, Windows 3.x, or later ¥ 50 MB of available hard disk space for ML-5000A ¥ 4 MB of RAM for ML-5000A ¥ Centronics-compatible parallel cable (IEEE 1284-compliant)
01-Setup 7/20/99 9:25 AM Page 5 Unpacking Remove the printer and all accessories from the packing carton. Save the carton and packing materials in case you need to repack the printer. Make sure you have the following items: Printer Power cord* Toner cartridge UserÕs Manual...
7/20/99 9:25 AM Page 6 Installing the Toner Cartridge 1. To open the printer cover, hold the cover using both hands and pull it toward you. 2. Unpack the Toner Cartridge. Carefully remove the sealing tape. 3. Rock the Cartridge 5 or 6 times to distribute the toner.
Page 16
01-Setup 7/20/99 9:25 AM Page 7 5. Grasp the handle and slide the Cartridge down between the toner cartridge slots, until it drops into place. 6. Close the cover. Set Up...
The clips snap when pushed into the notches. 2. Attach the other end of the parallel cable to your computer. Note: Make sure the printer power is off when you connect it to the computer. Set Up...
7/20/99 9:25 AM Page 9 Attaching the Power Cord 1. Plug one end of the power cord into the connector at the back of the printer, and the other end into a wall outlet. 2. Turn on the printer. Set Up...
Page 19
00-Cover&Contents 7/16/99 7:37 PM Using Your Documentation The following documentation is supplied to help you use your new Samsung laser printer. Setup Guide This manual describes how to unpack, set up, and start using your printer, including how to install the printer driver, which you must install to use the printer.
Rear View Inside Selecting a Location System Requirement Unpacking Installing the Toner Cartridge Connecting the Printer to Your Computer Attaching the Power Cord Loading a Stack of Paper Installing Printer Driver Windows 95/98/NT4.0 Installation Windows 95/98 Plug and Play If Windows Does Not Run the CD-ROM Windows 3.1x Installation...
Page 21
00-Cover&Contents 7/16/99 7:37 PM Page 4 ELECTRONICS Visit us at http://samsungtelecom.com P/N. JC68-00031B Rev.1.00...