Advertisement
User's
Manual
Thank you for purchasing the AQ2200 Series Modules.
To ensure correct use, please read this manual thoroughly before beginning operation. For details on the
functions and performance, see the AQ2200 Multi Application Test System User's Manual (IM 735101-01EN,
IM 735101-03EN or IM 810518920-05E).
The following manuals, including this one, are provided as manuals for the AQ2200 Series. Please read all
manuals.
Manual Title
AQ2200 Series
Multi Application Test System
User's Manual Startup Guide
AQ2200 Series
Multi Application Test System
Frame and Module Operation
User's Manual
AQ2200 Series
Multi Application Test System
Application Operation User's Manual
AQ2200 Series
Multi Application Test System
Communication Interface User's Manual
64 Mbit Program Pattern Option
User's Manual
SDH/SONET Frame Option
User's Manual
AQ2200 Series Modules
Checking the Contents of the Package
and Handling Precautions of the Modules
Connector adapter for multi-fiber cable
User's Manual
The "EN" and "E" in the manual numbers are the language codes.
The latest editions of manuals and firmware (AQ2211, AQ2212, AQ2201, or AQ2202 software) are available to
registered customers for download from our website. You can register from the following website.
http://tmi.yokogawa.com/
Contact information of Yokogawa offices worldwide is provided on the following sheet.
Manual No.
PIM 113-01Z2
Safety Precautions
The general safety precautions described herein must be observed during all phases of operation. If the
instrument is used in a manner not specified in this manual, the protection provided by the instrument may be
impaired. YOKOGAWA assumes no liability for the customer's failure to comply with these requirements.
The following symbols are used on this instrument.
Handle with care. Refer to the user's manual or service manual. This symbol appears on dangerous
locations on the instrument which require special instructions for proper handling or use. The same
symbol appears in the corresponding place in the manual to identify those instructions.
Laser radiation hazard
French
À manipuler délicatement. Toujours se reporter aux manuels d'utilisation et d'entretien. Ce symbole a
été apposé aux endroits dangereux de l'instrument pour lesquels des consignes spéciales d'utilisation
ou de manipulation ont été émises. Le même symbole apparaît à l'endroit correspondant du manuel
pour identifier les consignes qui s'y rapportent.
Danger : Appareil laser à rayonnement.
AQ2200 Series Modules
Checking the Contents of the Package and
Handling Precautions of the Modules
Manual No.
IM 735101-01EN
IM 735101-03EN
IM 735101-04EN
IM735101-17EN
IM 810518801-61E
IM 810518801-62E
IM 810518901-04E
IM AQ9340-01EN
Description
List of worldwide contacts
12th Edition: September 2018 (YMI)
All Rights Reserved, Copyright © 2007, Yokogawa Electric Corporation
All Rights Reserved, Copyright © 2012, Yokogawa Test & Measurement Corporation
Printed in Japan
Description
The supplied CD contains the PDF file of this manual.
This manual describes the handling precautions for, the
names and functions of all parts of, and the firmware
upgrade procedure for the AQ2200 Series.
The supplied CD contains the PDF file of this manual.
This manual describes all the features of the AQ2200 Series
and how to use them, with the exception of some of the
application and communication features.
The supplied CD contains the PDF file of this manual.
This manual describes the AQ2200 Series application
features and how to use them.
The supplied CD contains the PDF file of this manual.
This manual describes the AQ2200 Series communication
interface features and how to use them.
This manual describes how to create program patterns for
the AQ2200-601 10 Gbit/s BERT module with the /M option.
This manual describes how to create SDH/SONET patterns
for the AQ2200-601 10 Gbit/s BERT module with the /P1
option.
This manual. This is included with AQ2200 Series modules.
It explains the handling precautions of the module and lists
the package contents.
This manual explains the handling precautions of the
connector adapters and how to use them.
IM 810518901-04E 1/10
12th Edition
Advertisement
Table of Contents
Related Manuals for YOKOGAWA AQ2200-111
Summary of Contents for YOKOGAWA AQ2200-111
-
Page 1: Safety Precautions
YOKOGAWA assumes no liability for the customer’s failure to comply with these requirements. The following symbols are used on this instrument. - Page 2 Safty Precautions of the Modules The following precautions must be observed when handling the modules. YOKOGAWA assumes no liability for the customer’s failure to comply with these requirements. For details on the installation/removal procedure and the specifications of the modules, see the AQ2200 Multi Application Test System User’s Manual (IM 735101-01EN or IM 810518920-05E).
- Page 3 Ne pas utiliser l’instrument en présence de gaz ou de vapeurs inflammables. Cela pourrait être extrêmement dangereux. Ne pas retirer le capot, ni démonter ou modifier l’instrument Seul le personnel YOKOGAWA qualifié est habilité à retirer le capot et à démonter ou modifier l’instrument. Panneau vide Pour éviter tout choc électrique et garantir un fonctionnement de l’instrument conforme aux...
- Page 4 Safety Precautions for Laser Products This instrument uses a laser light source. This instrument is a Class 1M laser product as defined by IEC60825-1 Safety of Laser Products—Part1: Equipment Classification and Requirements. In addition, this instrument complies with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Laser Class 1M Label Using an optical instrument, such as a loupe, magnifying glass, or microscope, when...
-
Page 5: Waste Electrical And Electronic Equipment
Authorized Representative in the EEA Yokogawa Europe B.V. is the authorized representative of Yokogawa Test & Measurement Corporation for this product in the EEA. To contact Yokogawa Europe B.V., see the separate list of worldwide contacts, PIM 113-01Z2. About Environmental Standard The following modules do not comply with environment regulation standard EN50581. - Page 6 To determine the software version, press the SYSTEM key and then the “Information”. The version number is displayed under “Soft Version” in the Overview screen. AQ2201/AQ2202 Version Model Module Name/Application Name (Soft Version) 810518901 AQ2200-111 DFB-LD Module 2.0 and later 810518902 AQ2200-141 FP-LD Module 2.0 and later...
-
Page 7: Checking The Contents Of The Package
If some of the contents are not correct or missing or if there is physical damage, contact the dealer from which you purchased them. Also, check that the model and suffix code on the name plate on the side panel of the module match those of your order. AQ2200-111 DFB-LD Module ( 810518901) MODEL •... - Page 8 AQ2200-136 TLS Module ( 810518904) AQ2200-211 Sensor Module ( 810518908) MODEL MODEL Item Suffix Code Description Item Suffix Code Description Optical connector -FCA FC/Angled PC connector Connector /FCC AQ9447 (FC) connector adapter adapter with a light shielding cap Optical fiber -SMF SM fiber /SCC...
- Page 9 AQ2200-311A ATTN Module ( 735131), AQ2200-412 OSW Module ( 735143) MODEL MODEL AQ2200-312 ATTN Module ( AQ2200312) MODEL Item Suffix Code Description Item Suffix Code Description Port configuration 1 × 16 type Optical fiber Optical fiber MMF (GI 50/125) MMF (GI 50/125) MMF (GI 62.5/125) Optical connector -FCC...
- Page 10 AQ2200-631 10 Gbit/s Optical Receiver 810518803) MODEL Item Suffix Code Description Optical connector SC connector FC connector Cable U-link coaxial cable • Accessories (*: Already attached to the module) Name Q’ty Notes Protection cap Terminator for circuit protection User’s manual This manual AQ2200-641 XFP Interface Module ( 735161)
Need help?
Do you have a question about the AQ2200-111 and is the answer not in the manual?
Questions and answers