Advertisement
FINAL NoTeS:
• After the installation is complete, double check that all nuts & bolts are tight. Refer to the following
chart again for the proper torque specifications. (Do not retighten the nuts & bolts where thread
lock compound was used.)
• With the vehicle placed on the ground, cycle the steering lock to lock & inspect the steering,
suspension, brake lines, front & rear drivelines, fuel lines, & wiring harnesses for proper operation,
tightness, & adequate clearance.
• Have the headlights readjusted to the proper settings.
• Have a qualified alignment center realign the front end to the factory specifications.
• Retorque all the bolts after the first 100 miles.
INCH SYSTEM
Bolt Size
5/16
3/8
7/16
1/2
9/16
5/8
135 FT LB
3/4
185 FT LB
*The above specifications are not to be used when bolt is being installed with a bushing.
Seat Belts Save Lives, Please Wear Your Seat Belt.
I-C766SP
TORQUE SPECIFICATIONS
Grade 5
15 FT LB
20 FT LB
30 FT LB
35 FT LB
45 FT LB
60 FT LB
65 FT LB
90 FT LB
95 FT LB
130 FTLB
175 FT LB
280 FTLB
Bolt Size
Grade 8
6MM
8MM
10MM
12 MM
14MM
16MM
18MM
METRIC SYSTEM
Class 8.8
5 FT LB
18 FT LB
32 FT LB
55 FT LB
85 FT LB
130 FT LB
170 FT LB
Class 10.9
9 FT LB
23 FT LB
45 FT LB
75 FT LB
120 FT LB
165 FT LB
240 FT LB
Pg 13
Advertisement
