Skyjacker C720MS Installation Instructions

www.skyjacker.com
• Metric/Standard Wrenches & Sockets
• Floor Jack
• Jack Stands
• Measuring Tape
• Torque Wrench
Before beginning the installation, read these instructions and the enclosed driver's WARNING
NOTICE thoroughly and completely. Also affix the WARNING decal in passenger compartment in
clear view of all occupants. If any of these items are missing from this instruction packet, do not pro-
ceed with installation, but call SKYJACKER ® to obtain needed items. If you have any questions or
reservations about installing this lift kit, call SKYJACKER ® at 318-388-0816 for Technical Assistance
or Customer Service departments.
Make sure you park the vehicle on a level concrete or asphalt surface. Many times a vehicle is
uneven (side-to-side) from the factory, but usually not noticed until a lift kit has been installed which
makes the difference more visible. Using a measuring tape, measure the front and rear (both sides)
from the ground up to the center of the fender opening above the axle. Record below for future ref-
erence.
IMPORTANT NOTES:
• Please refer to Parts List to insure that all parts and hardware are received prior to disassembly of
vehicle. If any parts are found to be missing, contact your dealer as soon as possible.
• If larger tires (10% more than stock diameter) are installed, speedometer recalibration is necessary
(see Chevy/GM dealer or Tire Store).
• After installation, a qualified alignment facility is required to align the vehicle to factory specs.
I-C720MS 07-08
REQUIRED TOOL LIST:
07-08 Chevy/GM
2" Leveling Kit

Installation Instructions

Part # C720MS
Pg 1