Skyjacker D6912ST Installation Instructions

www.skyjacker.com
RequIReD Tool lIST:
• Safety Glasses
• Metric / Standard Sockets & Wrenches
• Spring Compressor
• Floor Jack
• Jack Stands
• Measuring Tape
• Torque Wrench
Before beginning the installation, thoroughly & completely read these instructions & the enclosed
driver's WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view
of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior
to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER ®
Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or
reservations about installing this lift kit, call SKYJACKER ® Technical Assistance at 318-388-0816.
Make sure you park the vehicle on a level concrete or asphalt surface. Many times a vehicle is not
level (side-to-side) from the factory & is usually not noticed until a lift kit has been installed, which
makes the difference more visible. Using a measuring tape, measure the front & rear (both sides)
from the ground up to the center of the fender opening above the axle. Record this information
below for future reference.
Driver Side Front:
Driver Side Rear:
IMPORTANT NOTES:
• If larger tires (10% more than the stock diameter) are installed, speedometer recalibration will be
necessary. Contact your local Dodge dealer or an authorized dealer for details.
• After installation a qualified alignment facility is required to align the vehicle to OEM specifications.
I-D6912ST REV2 3-11
Dodge 1500 4WD
1"- 2.5" Performance Strut

Installation Instructions

Passenger Side Front:
Passenger Side Rear:
2006 - 2011
Pg 1