Wireless Remote Controller - Hitachi RPIL-1.0UNE1NH Service Manual

1 . O P T I O N L I S T
1 . O P T I O N L I S T
2.
Wireless Rmote Controller (Model：HCRA31NEWH)
Remote controller
The remote controller transmits signals to the system.
1 MODE
Press this button to select the operation mode.
3 POWERFUL
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
16℃ set temp. automatically; Fast heating
operates at auto fan speed with 30℃ set
temp. automatically).
AUTO
5
Used to enter fuzzy logic operation directly.
TIMER
7
Used to set or cancel the timer operation.
SLEEP
9
Used to set or cancel Sleep Mode operation.
RESET
11
Back to the factory defaults.
Indication symbols on LCD:
Cooling indicator
Dry indicator
Fan only indicator
Heating indicator
Auto indicator
Note: ①Each mode and relevant function will be further specified in following pages.
②Heating and electric heating function are not available in single cooling only models.
③Pictures in the manual are for reference only, specifications are subject to the physical product.
1
6
7
5
9
2 2
Auto fan speed
High fan speed
Medium fan speed
Low fan speed
Quiet fan speed
10
TEMP.
2
Used to adjust the room temperature and
the timer.
ON/OFF
4
The appliance will be started when it is
4
energized or will be stopped when it is
in operation, if you press this button.
3
10
FAN
6
8
Used to select fan speed in sequence auto,
quiet low, low, medium and high.
UP/DOWN
8
Used to stop or start horizontal
louver swinging and set the desired up/
11
down airflow direction.
LEFT/RIGHT
10
Used to stop or start vertical adjustment
louver swinging and set the desired left/right
airflow direction.
Run indicator
OFF indicator
Sleep indicator
Display set temp.indicator
Fan speed indicator
adjustment
Signal transmit
Battery indicator
Timer ON indicator
Timer OFF indicator
Button locked indicator
Timer ON/OFF set hour
Display set temperature