Equipment Cable End Processing; End Processing Of Each Cable Core; Connection To Display Unit - JRC JMA-933B Installation Manual

Equipment Cable End Processing

6.2.2

End Processing of each cable core

6.2.3

Connection to Display Unit

6.2.4
Use 14-core composite cable 2695110056 and coaxial cable RG-10/UY to connect power control
unit NQE-3167 to each display unit of NCD-2096/F.
Among the two cables, use coaxial cable RG-10/UY to connect the radar video signal.
For the procedures for processing the cable end and the wiring procedures, see Fig 6-14:
Equipment cable end processing.
For the wiring procedures, see Section 6.2.6 Inter-board connection diagram of power control unit.
Shielding
Equipment cable
Fig 6-14: Equipment cable end processing
Coaxial or Shield cable
Vinyl cable
Fig 6-15: End processing of each cable core
Tape
6-14