Philips OneBlade QP2530 User Manual page 8

ENGLISH
8
3 Place the edge of the blade perpendicular onto the skin.
- Make straight strokes while applying gentle pressure.
4 Switch off and clean the appliance (see 'Cleaning and maintenance')
after every use.
Trimming with comb
The click-on stubble combs allow you to trim hair to different lengths.
QP2531, QP2530 come with 4 click-on stubble combs: 5mm, 3mm, 2mm,
1mm.
QP2520 comes with 3 click-on stubble combs: 5mm, 3mm, 1mm.
QP2522, QP2521 come with 2 click-on stubble combs: 5mm, 1mm.
Start with the 5mm comb to acquire practice with this appliance. The
indication on each comb corresponds to the hair length in millimetres.
1 Place the comb onto the blade. You can attach and use the combs
with the teeth pointing upwards or downwards.
Note: Always trim in the direction of the teeth of the comb.
2 Switch on the appliance.
3 Place the comb onto the skin and move the appliance in the
direction of the teeth of the comb.
Note: For the best result, move it against the grain.
Tips
- Always make sure that the tips of the click-on stubble comb point in
the direction in which you move the appliance.
- Make sure that the flat part of the comb is always in full contact with
the skin to obtain an even trimming result.
- Since hair grows in different directions, you need to hold the appliance
in different positions as well.
- Trimming is easier when your skin and hair are dry.
4 Switch off and clean the appliance (see 'Cleaning and maintenance')
after every use.