Philips OneBlade QP2530 User Manual page 7

Shaving
Before you use the appliance, always check the blade for damage
or wear. If the blade is damaged or worn, do not use the appliance,
as injury may occur. Replace a damaged blade before you use the
appliance (see chapter 'Replacement').
Shaving tips and tricks
- Make sure that the blade is in full contact with the skin by placing it flat
on the skin.
- For the best result, move the appliance against the grain.
- Make long strokes while you press lightly.
- You can use the appliance dry or wet with gel or foam, even in
the shower.
- Shaving a clean beard and face gives the best results.
1 Switch on the appliance.
2 Place the blade on the skin and move the appliance up or against
the grain in long strokes while you press it lightly.
Note: Make sure you hold the surface of the blade flat against your skin.
3 Switch off and clean the appliance (see 'Cleaning and maintenance')
after every use.
Edging
You can also use both edges of the blade to create sharp lines and perfect
edges. Hold the appliance in such a way that the blade is perpendicular to
the skin and one of its edges touches the skin. This allows more precise
detailing of sideburns and the area around the mouth and nose.
1 To use the blade for creating sharp edges and lines, use either edge
of the blade.
2 Switch on the appliance.
ENGLISH
7