Philips OneBlade QP2530 User Manual page 13

Problem
The appliance does
not charge when it
is connected to the
mains.
I cannot switch on
the appliance when
it is connected to the
mains.
The appliance does not
work anymore.
The appliance doesn't
cut hairs anymore.
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaflet.
Guarantee restrictions
The blade is not covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
Possible cause
The appliance has to be
switched off when you
charge it.
You cannot use the
appliance when it is
charging. You can only use
the appliance without cord.
The rechargeable battery
is empty.
The blade is blocked by dirt. Switch on the appliance and rinse the blade
The blade is placed on the
handle incorrectly.
The blade is damaged
or worn.
Solution
Switch off the appliance.
Disconnect the appliance from the mains
before use.
Charge the appliance (see chapter 'Charging').
QP2530: During charging, the battery charge
indicator flashes. QP2520: During charging, the
charge indicator on the adapter lights up. If the
battery charge indicator does not flash or light
up, check whether there is a power failure or
if the wall socket is live. If there is no power
failure and the wall socket is live but the battery
charge indicator still does not flash or light up,
take the appliance to your dealer or a Philips
service centre.
under the tap with warm water.
Hold the blade in a cup with warm water
(60°C and no hotter) for approx.30 seconds.
Push the blade onto the appliance until you
hear a click.
Replace the blade with a new one.
See chapter 'Replacement'.
ENGLISH
13