Kobalt KDD 524B-03 Manual page 101

OPERATING INSTRUCTIONS
3. Adjusting the LED Work Light Head
The light head (C) pivots from fully upright to fully
folded, and can remain at any point within the 135°
range.
4. Loop
The LED work light is equipped with a loop (D). The
light can be carried or hung to an object with the
loop.
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool. For
safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your LED work light; never use detergent or alcohol.
3
4
F
7
C