9】Specifications; General Specification; Optional Accessories - Sanwa SP21 Instruction Manual

【9】SPECIFICATIONS
9-1 General Specifications
AC Rectifier Form
Meter type
Accuracy Assurance Temperature/Humidity Range
Operating Temperature/Humidity Range
Storage temperature/Humidity Range
Internal Battery ：R6P (IEC) or UM-3 1.5 V×2
＊Factory-preinstalled built-in battery
A battery for monitoring is preinstalled before shipping, therefore it may run down
sooner than the battery life specified in the instruction manual.
The "battery for monitoring" is a battery to inspect the functions and specifications of
the product.
Internal fuse
Dimension and Mass
Accessories
9-2 Optinal Accessories
・Clip adapter CL-14 (Red, Black 1set) ・Carrying case C-SP
・HV probe
[Specifications]
Max. rated input value : DC 30 kV
Internal resistance : 480 MΩ
Dimension :φ18×273 mm （Barrier:φ40、Test pin:φ3.5 mm×7）
Mass: 160 g （Without cord）
Cord length : Approx.900 mm
：Half-wave rectifier form
：Internal magnet type, Taut band meter
：21〜25 ℃ 75 ％RH max. No condensation
：3〜43 ℃ 80 ％RH max. No condensation
：−10〜50 ℃ 70 ％RH max. No condensation
：φ5×20 mm F500 mAH/250 V
Fast fuse Blowout capacity 300 A
：144 （ H ） ×99 （ W ） ×41 （ D ） mm・approx.270ｇ
：Instruction manual 1 Spare fuse 1
Test leads （ TL- 21a）1
HV-20
Accuracy : ±20 ％
42