Figure 3-8 Network Tab - ABB XSeries G4 6200 User Manual

2) In PCCU32 Entry mode, select Communications from the tree-view. Upon
3) The user will need to enter a Network ID, and set the Enable DHCP
4) Next, the user will need to locate the Totalflow – TCP selection under
Page 3–8
selection, click on the Network tab (see Figure 3–8).
Figure 3–8 Network tab
parameter field value to Yes. The other fields within the tab will auto-
populate. Click the Send button.
Communications in the PCCU32 tree-view (see Figure 3–9). Once selected,
the user is taken to the Setup tab. In this tab, the user needs to set the
Protocol parameter value to Totalflow/TCP. When done, click the Send
button.
2104349 rev. AD