Nat - SmartRG SR516ac User Manual

On this page, you can select a LAN port and enable VLAN mode on it.
1. In the left navigation menu, click
2. Select the LAN port on which you want to enable VLAN mode.
3. Click Enable VLAN Mode.
4. To add a VLAN:
a. Click Add. A table appears where you can enter the details.
b. Enter the VLAN ID. Options are 1 - 4094.
c. In the Pbits field, enter the type of bits being passed. Options are 1 - 7.
5. Click Apply/Save to apply your settings.
6. To remove a VLAN entry, click the

NAT

In this section, you can configure the NAT (Network Address Translation) settings.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
Advanced Setup > LAN > Local VLAN
Remove checkbox next to it and then click the
Setting. The following page appears.
Remove button.
65