Table of Contents
Advertisement
Modify the fields as needed, using the information provided in the table below, and then click Apply/Save.
Field Name
Description
RADIUS Server IP
Enter the IP address of the RADIUS (Remote Authentication Dial In User Service) server associated with
address
your network. RADIUS server is used to authenticate the hosts on the wireless network.
RADIUS Port
Enter the port number for the RADIUS server. Port 1812 is the default and the current standard for
RADIUS authentication per the IETF RFC 2865. Older servers may use port 1645. Options are 1 - 65535.
RADIUS Key
(Optional) Enter the encryption key if needed to authenticate to the specified RADIUS server.
WEP Encryption
This option is set to Enabled and cannot be changed. It enables WEP (Wired Equivalent Privacy) mode.
Encryption Strength
Select the length of the encryption method. Options are 128-bit and 64-bit. 128-bit is the default and
is the more robust option for security.
Current Network Key
Select which of the four keys is presently in effect. The default is 2.
Network Key 1-4
Enter up to two encryption keys using the on-screen instructions to achieve the desired security
strength. Network Keys 1 & 4 are set automatically and cannot be changed.
WPA2 and Mixed WPA2/WPA Authentication
The following fields appear when you select WPA2 or Mixed WPA2/WPA in the
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
Network Authentication
field.
115
Hide quick links:
Advertisement
Table of Contents
