Open And Shared Authentication - SmartRG SR516ac User Manual

Field Name Description
Note: If the
automatically made active.
Set Authorized (Available only when Enter STA PIN is selected) Enter the MAC address of the authorized (input) sta-
Station MAC tion in format: xx:xx:xx:xx:xx:xx.
Set WPS AP Mode Select how security is assigned to clients.
Device PIN This value is generated by the access point.
3. In the Manual Setup AP
less band defined for your gateway.
4. Select the Network Authentication
WPA-PSK. Detailed instructions are provided for each method in the following sections:

Open and Shared Authentication

l
802.1X Authentication
l
WPA2 and Mixed WPA2/WPA Authentication
l
WPA2-PSK and Mixed WPA2/WPA-PSK Authentication
l
5. Click Apply/Save to commit your changes.
Open and Shared Authentication
The same configuration fields apply for both Shared and Open authentication types except that
default for the Shared method.
The following fields appear when you select Open or Shared in the
enabled.
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
Use AP PIN: The entry field and the
l
PIN and Set Authorized Station MAC
Configured: The gateway assigns security settings to clients. This is the default.
l
Unconfigured: An external client assigns security settings to the gateway.
l
section, select the SSID for the device that you want to configure. The default is the 5 GHz wire-
method and then fill in the fields that appear. The default method is Mixed WPA2 /
Set Authorized Station MAC
fields are left blank, the PBC (push-button) mode is
Network Authentication field and
field disappear.
WEP Encryption is enabled by
WEP Encryption is
113