Safety Precautions - Aaeon PCM-8200 Quick Installation Manual

C o m p a c t B o a r d

2.1 Safety Precautions

Chapter 2 Quick Installation Guide
Always completely disconnect the power cord from
your board whenever you are working on it. Do not
make connections while the power is on, because a
sudden rush of power can damage sensitive
electronic components.
Always ground yourself to remove any static charge
before touching the board. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative
surface or in a static-shielded bag when they are not
in the chassis
P C M - 8 2 0 0
2 - 2