Temporary Program Override - Robertshaw 9620 User Manual

110-732E 7/18/01 3:05 PM
Begin Programmed Operation
1. Place AUTO-ON
into AUTO.
PROG
MAN
AUX CHECK EMER
SET PROG/MAN COOL-OFF-HEAT-EM
2. Place COOL-OFF-HEAT-EM
into COOL or HEAT,
depending on the season.
3. Press PROG/MAN button
until indicator is in PROG position.
PROG
MAN
AUX CHECK EMER
SET PROG/MAN COOL-OFF-HEAT-EM
NOTE: O
NCE THE THERMOSTAT TURNS THE SYSTEM OFF WHILE IN THE COOL OR HEAT MODE
5 . T
ING ON FOR ABOUT MINUTES HIS PROTECTS THE COMPRESSOR
5- , RESET. T
THE MINUTE DELAY FOR INSTALLATION PRESS

Temporary Program Override

To temporarily increase or decrease temperature:
Press or .
PROG
MAN
AUX CHECK EMER
SET PROG/MAN COOL-OFF-HEAT-EM
The thermostat will automatically return to the program at the next sched-
uled setting change or after four hours.
Page 11
AUTO - ON
COOL-OFF-HEAT-EM
AUTO - ON
COOL-OFF-HEAT-EM
ET PROG/MAN C
AUTO - ON
, -
A BUILT IN DELAY KEEPS THE COMPRESSOR FROM TURN
. N ( )
O ADDITIONAL TIME DELAY RELAY DELAY ON BREAK
.
HIS WILL ERASE THE DELAY AS WELL AS ALL PROGRAMMING
AUTO - ON
11
SUMMER
WINTER
PROG
MAN
-
. T
IS NECESSARY O OVERRIDE