Customizing - Robertshaw 9620 User Manual

110-732E 7/18/01 3:05 PM
Step 4: Customizing Your Thermostat
Set Time of Day, Day of Week,
Temperature Differential,
Residual Cooling
1. Press SET and PROG/MAN.
Release simultaneously.
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT-EM
Press or to change time of day.
2. Press
SET P
3. Press
SET P
temperature differential.
NOTE: T
HE TEMPERATURE DIFFERENTIAL IS FACTORY PRESET AT
WHENEVER THE ROOM TEMPERATURE CHANGES BY ONE FULL DEGREE FROM THE TEMPERA
,
TURE SETTING THE SYSTEM WILL TURN ON
INCREASE THE TEMPERATURE DIFFERENTIAL
4. Press
SET P
temperature differential.
NOTE: T
HE SECOND STAGE TEMPERATURE DIFFERENTIAL IS FACTORY PRESET AT
5. Press
SET P
NOTE: T
HE RESIDUAL COOL FEATURE WILL KEEP THE SYSTEM FAN ON FOR AN
30, 60, 90
ADDITIONAL OR SECONDS AFTER THE COMPRESSOR CYCLES OFF IN COOL
. T
MODE HE RESIDUAL COOL FEATURE CAN BE SET ONLY IN THE COOL MODE
Page 8
SET PROG/MAN
AUX CHECK EMER
AUTO - ON
Press
to change day of week.
Press
to change 1st stage
1°. T
HIS MEANS THAT
. I
F THE SYSTEM TURNS ON TOO OFTEN
.
Press
to change 2nd stage
Press
to change
residual cooling.
8
1=MO
2=TU
3=WE
4=TH
5=FR
6=SA
7=SU
-
,
2°.
.