Add a PowerFlex 755 Drive to the Controller Project
1. Right-click Ethernet network and choose New Module.
2. Choose the following:
• A PowerFlex 755 drive with embedded EtherNet/IP adapter
• A PowerFlex 755T drive product with embedded EtherNet/IP adapter
3. Follow the appropriate procedure to add and configure an option card
and drive:
• Add an Option Card to a PowerFlex 755 Drive in I/O Mode on
page 34
• Add an Option Card to a PowerFlex 755T Drive Product in I/O
Mode on
page 37
Rockwell Automation Publication 750-UM004B-EN-P - October 2018
Standard I/O – Network STO Programming and Operation
Chapter 4
33