Advertisement
360°
5°
15°
4.88''
CAUTION: Read all instructions before assembly. Failure to assemble properly may
!
result in product damage or injury.
©
Copyright Notice: This guide is a component of the UPLIFT E3 Keyboard Tray. This guide is a part of the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.
com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.
UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
®
Standard Keyboard Tray
KBT001
Step 5
Finally, peel the adhesive strip off the Wrist support and apply it to
the front of your Keyboard Tray, matching the curved edge of the
Wrist support with the curved edge of the Keyboard Tray.
Adjustment Guide
The Keyboard Tray rotates at the point where the Mechanism
attaches to the Track. It can rotate 360 degrees.
With a 21'' track, the Keyboard Tray can be stowed away
and slides completely under your desk when not in use.
Holding onto the Tray with your left hand, unlock the lever on the
mechanism just behind the Tray.
You can now make adjustments to the height and tilt.
Guiding the Tray with both hands, adjust the height up or down,
and fine-tune the tilt to your liking.
To lock the Keyboard Tray into your desired position, hold the tray
securely with your left hand and lock the lever with your right hand.
If the height and tilt mechanism ever gets loose,
tighten it with the included Allen wrench.
Advertisement
