Safety Instructions - Husqvarna A 1000 Operator's Manual

Safety Instructions

Handling
Warning
• Make sure that you read and understand the instructions for the main product to ensure that you know what personal
equipment to wear, what safety equipment to use and how to work in a safe mode.
Warning
• Cables damaged through crushing or splitting can be dangerous if used and should be replaced immediately. Risk of
personal injury.
Warning
•
Do not connect the machine to an unearthed socket. Risk of personal injury.
Warning
• Make sure the assembly area is firm, so the air scrubber does not tip over. Risk of personal and material injury.
Warning
•
Risk of pinching when handling the toggle fastener.
Warning
• The machine must not be used in environments where explosive gases may be present. Serious risk of explosion
Warning
• The machine should be turned off at the switch before releasing the power lead from the wall outlet. If the switch is in
the on position, a spark can occur between the contact on the power lead contact.
Service
Warning
• Remove the plug from the wall socket when carrying out maintenance work. Risk of personal injury.
Warning
• Dust that is hazardous to health can be spread when the coarse filter and the absolute filter are replaced. Accordingly,
the user should wear protective glasses, protective gloves, and a breathing mask conforming to protection class FFP2
Warning
• Do not puncture the absolute filer. Risk of dust dispersion.
Function
Connect the lead to the power outlet, attach the outlet hose if available. Start the machine by pressing the start knob. The air
scrubber has two speeds.
The air scrubber separates material in two stages:
The first stage uses a coarse filter. This traps the bigger particles and acts as protection for the main filter. The coarse filter
should be changed on a daily basis.
The second absolute filter separates the unhealthy dust that is invisible to the eye.