These instructions are only for the air scrubber type Husqvarna A 600 / A 1200. The air scrubber, Husqvarna A 600 / A 1200 can only be used with dry, non-explosive materials. Husqvarna not be held responsible if the air scrubber is used for other applications or has been used in ways other than those outlined in this instruction manual.
Product overview A 600 Stop button A 1200 Stop button Safety Instructions Handling Warning Make sure that you read and understand the instructions for the main product to ensure that • you know what personal equipment to wear, what safety equipment to use and how to work in a safe mode.
Warning Risk of pinching when handling the toggle fastener. • Warning The machine must not be used in environments where explosive gases may be present. Serious • risk of explosion Warning The machine should be turned off at the switch before releasing the power lead from the wall •...
Filter indicator A 600 / A 1200 has two filter indicators connected to a warning light which measures the pressure drop over the filter. If the pressure drop is too high, a yellow lamp light up, indicating that the pre- filter should be changed.
PROBLEM SOLVING The A 600 / A 1200 is designed and manufactured for severe environments and tasks, but the user must note that the machine components must be protected from knocks and blows. Filter and sealing connections are carefully chosen to serve the operator. Therefore, the machine must be handled with care if it is to work correctly for many years.