General Safety Precautions - Husqvarna C 5500 Operator's Manual

Dear Customer,
Thank you for choosing Husqvarna Construction Products as your supplier.
We hope that the model C 5500 pre-separator will be to your satisfaction and meet your expectations.
Please feel free to browse information about our product programme on our web site
Notice!
These instructions are only for pre-separators C 5500.
Pre-separators C 5500 can only be used with dry, non-explosive materials.
Husqvarna Construction Products will not be held responsible if the pre-separator is used for other applications or been used in
ways other than those outlined in this instruction manual.
Before using the machine, please safety regulations carefully.
Read the complete instruction manual before using the pre-separator.
All spare parts used for pre-separator types C 5500 must be those specified by Husqvarna Construction Products.

General safety precautions

•
Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Save all
warnings and instructions for future reference.
• Keep in mind that it is you, the operator that is responsible for not exposing people or their property to accidents or hazards.
• The machine must be kept clean. Signs and stickers must be fully legible.
• Secure the machine during transport.
•
Ensure the machine is cleaned and that a complete service is carried out before long-term storage.
Unpacking
When unpacking the machine, please check for damage and that that following accessories are included:
•
The hose with end fittings
If any of the above-mentioned part are missing, please contact your local distributor or our sales representative.
Assemble the front wheels by using the bolt, washer and nut that are included in the package.
Introduction
http://www.husqvarnacp.com