Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Glatz AMBIENTE
Summary of Contents for Glatz AMBIENTE
- Page 1 Sunshade Ambiente Service Manual Ambiente...
- Page 2 ........................7 Dismantling of spindle, motor, gear and sliding blocks ........11 The right to make technical changes is reserved. © Glatz AG 09/2010 GLATZ AG, Neuhofstrasse 12, 8500 FRAUENFELD / SWITZERLAND latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010...
- Page 3 • Loosen screws on the rod extensions. Push the extension into the rod, then pull downward the textile bag and after you will be able to take out the extension. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 4 Open Velcro fastenings on the rods before removing the fabric. • Two people lift shade part at two rod ends in order to relieve load on the • cable wire. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 5 Remove the top and the cover. • • old version of the shade fastening has two screws > consultation with the Repair Center concerning the compatibility latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 6 The tension must be considered (attach cable straps on the corner rods). Line up the shade part and pull tight the screws at the top of the carrying • arm. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 7 Lay shade poles on the table and loosen screw. Then knock out the bolt • until the carrying arm can be moved freely. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 8 Removing the cover plate: • • Loosen cable wire fastening on the slide, so that there is no tension on the • cable wire. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 9 Loosen cable wire. Twist the grub screws out using the screwdriver. • Twist out top link screw and knock out the bolt with a punch. • latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 10 • If the bolt is pulled out of the carrying arm, the pulleys can be taken out at • the pole end. rope guide latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 11 Dismantling of the slide is only necessary if it is not sliding smoothly on the pole (jerky movement). Dismantling of spindle, motor, gear and sliding blocks Unscrew 4 countersink screws for fastening the gear. • latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 12 Ambiente Pull out spindle with gear + cable wire from the pole. • Changing of spindle, sliding blocks, cable wire, gear / rocker • latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 13 Attention: make sure that the cable wire is not twisted when inserted. • Position of the plate in relation to the pole (important) • latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 14 Sunshade Ambiente Mounting of the spindle complete with cable wire, gear, threaded nuts and • sliding blocks. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
- Page 15 • The upper link and the carrying arm are fastened in reverse order as • described under point 3. latz AG 2011_Servicemanual Ambiente_en Path:K:\Marketing&Verkauf\Drucksachen\Service Manual\Ambiente\Word-Dateien\2011_Servicemanual Ambiente_en.doc Created: Dino Aeschbacher/29.09.2010 Checked: Werner Maag/28.09.2010 Released: Sergio Malacarne/29.09.2010...
Need help?
Do you have a question about the AMBIENTE and is the answer not in the manual?
Questions and answers