Advertisement
Roller shades are covered by a lifetime guarantee on the shade roller against manufactures defects in materials and
workmanship as long as the original customer owns them. Our guarantee does not cover abuse misuse or improper
installation. Fringes and blinds may fade; this change is not covered under warranty.
How To Adjust Tension On Roller
On a spring shade the spring may become un-wound during shipping. If the blind does not roll-up
properly, proceed with the following:
To Tighten Spring
1. Installation brackets must be level.
2. Draw shade down about 18 inches.
3. Remove from brackets.
4. Re-roll up by hand.
5. Replace in brackets.
** repeat this procedure if necessary.
To Loosen Spring
1. Remove rolled-up blind.
2. Unroll about 18 inches.
3. Replace in brackets.
Note: Tools are not to be used for tightening or loosening roller springs.
Too much tension could damage spring and void the garuntee
Advertisement
