Table of Contents
Advertisement
for successful performance. Operators
working outside these limitations do so
at their own risk, unless specifi c advice
has been sought from, and provided by,
Goldacres in writing.
•
Inspect the equipment thoroughly for
damage and wear before operation.
•
Lubricate the equipment as per
recommended requirements before
operating.
•
Flush chemicals from equipment
immediately after use.
•
Do not operate the equipment while under
the infl uence of any drugs, alcohol or if
excessively tired.
•
Make sure that the equipment complies
with all relevant road regulations when
transporting.
•
Goldacres equipment uses several
materials that may be harmful to the
environment. Potentially harmful waste
used with Goldacres equipment includes
such items as oil, fuel, coolant, brake fl uid
and batteries. If these items are disposed
of incorrectly the waste can threaten the
surrounding environment and ecology. The
waste products can leech into surrounding
water sources and contaminate the area.
•
When draining fl uids from the equipment
use appropriate, leak proof containers.
Do not use food or beverage containers
because someone may consume the
contents by mistake.
Warnings
•
Sprayer to be on level solid ground.
•
Wheels to be chocked.
•
Hand brake to be engaged
•
Any unauthorised modifi cations to this
equipment may aff ect its function and
create a serious safety risk.
•
Keep clear of overhead obstructions –
especially power lines as contact can be
fatal.
•
Isolate the battery. The isolator switch is
situated on the bottom of the brake pod
which is located on the right hand chassis
rail.
Fitment Time
•
Fitment time will vary depending on
options on the machine and experience in
fi tting required parts.
•
Fitment time approximately 1 hour.
Tools Required
1. 1/4 Inch Socket or Ring/Open spanner
2. Flat head Screw driver
3. Needle Nose Pliers
4. 21mm Drill Bit
5. Drill
6. Heat Gun
7. 100mm Adjustable Shifter
8. Loctite 55 Pipe Sealing Cord
17
Advertisement
Table of Contents
