LaserLiner Quadrum OneTouch Operating Instructions Manual page 20

Slope function > 5°
Steeper slopes can be set using the angle plate,
man
which is available as an optional extra (product
automatically and set the angle plate to the zero
!
auto/man function LED ON: Manual alignment
Laser modes
Rotary mode
The following speeds can be set using the rotary
button: 0, 60, 120, 300, 600 rpm
Spot mode
You access spot mode by pressing the rotary
The laser can then be positioned exactly at the
measuring point by means of the direction
Scan mode
The scan button can be used to activate and set
You position the segment via the direction
Hand receiver mode
Working with the laser receiver (available as an
the operating instructions for the respective laser
20
GB