LaserLiner LiveTester Plus Operating Instructions Manual page 9

! Before using the device, you should always test it on
a main circuit you know to be operational within the
specified voltage range.
1 To check sockets
1. Plug the device into the
socket. Make sure that the
word TOP is at the top.
The
!
touching the contact electrode (5) indicates that there
is a life-threatening touch voltage on the PE conductor.
A qualified electrician should be called in to check the
entire installation.
Symbol N
(LCD)
(9)
/
Indicator active
/
Indicator not active
symbol appearing on the LC display while
PE L
(3) (2)
(phase conductor on PE conductor)
LiveTester Plus
2. Touch the contact
electrode (5) with your
finger and evaluate
the display according
to the table below.
Test result
Wiring correct
L / N reversed
L / PE reversed
PE = L
PE open
N open
L open
RCD
(7)
09
GB