Mira Montpellier Installation, Operation, Maintenance Manual page 25

Temperature Testing
Check and record warm water temperature regularly to confirm correct operating
performance of the valve. In health care applications such as hospitals, aged persons
facility, nursing homes etc. such checks must be made at least every month. More
regular temperature checks should be made where increased risks are perceived such
as where patients are unable to immediately respond to an increase in water
temperature by either shutting the water off or removing themselves from the contact
with the water. Records of warm water temperature checks should be included in a log
book.
Training
Maintenance personnel should also ensure that the user's staff are aware of the
importance of reporting temperature variations and when detected, the variations
should be recorded in the log.
Maintenance Procedures
Maintenance must be carried out in accordance with these instructions, and
must be conducted by designated, qualified and competent personnel.
This mixing valve is designed for minimal maintenance under conditions of normal
use.
External surfaces may be wiped clean with a soft cloth, and if necessary, a mild
washing-up type detergent or soap solution can be used.
Warning! Many household and industrial cleaning products contain mild abrasives
and chemical concentrates, and should not be used on polished, chromed or plastic
surfaces.
Should an internal malfunction occur then this will probably require replacement of
parts.
Components are precision-made, so care must be taken while servicing to avoid
damage.
When ordering spare parts, please state product type, i.e. Mira Montpellier, and identify
part name and number (refer to PARTS LIST). A Seal pack is available, containing
all the seals that may be necessary for renewal during maintenance or servicing.
25