Mira Montpellier Installation, Operation, Maintenance Manual page 15

9. Install the shower arm with the
clamp bracket and support bracket
fitted into the divertor valve. Make
sure that the riser arm is vertical
and mark the position of the support
bracket.
10. Drill and insert suitable wall plug.
11. Assemble the shower arm to the
divertor valve.
12. Tighten all the connections, taking
care not to damage the plated
surfaces.
13. Install the fixed head in position on
the shower arm making sure that the
'O' seal is fitted.
14. Connect the flexible hose to the
divertor valve and to the shower
handset.
15. Place the shower handset in the
clamp bracket.
Fixed Head
15
Shower Arm
Support Bracket
Clamp Bracket
Shower Arm