Stanley ID07 User Manual page 13

OPERATION
or right. See item 75 in the "ID07 Parts Illustration" on page 19.
Note: To more accurately tighten bolts, lubricate threads, check with a torque wrench and duplicate time of
impacting for other bolts of the same length and thread size.
4. Squeeze the trigger to activate the wrench.
Note: Hold the tool correctly and be ready to counteract normal or sudden movements. Have both hands
available.
5. Release the trigger to stop the wrench.
3
4
Figure 4 - Tool Use
COLD WEATHER OPERATION
If the wrench is to be used during cold weather, preheat the hydraulic fluid at low engine speed. When using the
normally recommended fluids, fluid temperature should be at or above 50 °F/10 °C (400 ssu/82 centistokes) before
use.
Damage to the hydraulic system or wrench can result from use with fluid that is too viscous or too thick.
ID07 User Manual ◄ 13