Assembly Instructions - Impex MARCY NS-6002RE Assembly & Owners Manual

ASSEMBLY INSTRUCTION
• Tools Required for Assembling the Machine: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP-1
⚫ Attach the front stabilizer (3) to the main frame (1). Secure using two carriage bolts (2), two
washers (6) and two domed nuts (7).
⚫ Insert the computer wire (16) through computer support tube (29), then attach the computer
support tube (29) to the main frame (1). Secure using 2 Allen bolts (24), 2 curved washers (8)
from the back side. Tighten the 2 sets of Allen bolt (24), flat washer (24) from lateral side.
© IMPEX INC.
8
24
25
24
1
7
6
2
6
29
24
25
3
flat
www.marcypro.com