Advertisement
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ14
PREPARATION
Connecting to Power
There are two ways in which to provide the camera with power.
One is using batteries (AA Alkaline) alternativley use an AC Adaptor
(DC 6V / 1.5A)
°·Using batteries
1
Open the battery cover by pushing in the
direction of the arrow.
2
Insert the battery taking note of the
polarity (+,-)
3
To close the battery cover, push it until it
clicks
°·Checking the battery
¶UYou can check the battery life on the LCD panel.
: Battery status
: Preparing a new battery
: Battery low-Replace new batteries.
1 4
PREPARATION
Reference
°§After the low battery symbol appears, the camera will continue to work
for approx 10 minutes.
°§This camera will automatically switch off when not in use for a period
of time. For more information regarding auto power off, please refer to
the power off section on page 49.
NOTE
¢ Ú Important Information about battery usage.
°§Please remove the batteries if the camera will not be used for a long
periods. Batteries can lose power over time and are prone to leak if
kept inside the camera.
°§Do not use manganese batteries as they cannot deliver sufficient
power.
°§Low temperatures (below O°...) can cause the camera to work for a
shorter period of time due to reduced battery performance. However
the batteries will recover at normal temperatures.
°§Do not use old and new batteries or different types together.
°§Extended use of the camera may cause the camera body to warm up.
This is perfectly normal.
°§If you are planning to use this camera for long periods of time it is
advisable to use an AC adaptor.
1 5
Advertisement
