Advertisement
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ32
SETTING UP THE SHOOTING FUNCTION
Other indicating items of photographing information indicator
Macro picture indicator
°§If you select macro photography mode, a symbol(
photograph information indicator.
°§If you select the normal shooting mode, the symbol(
Checking the battery
°§The battery status symbol of the photograph information indicator is shown below.
: Battery status
: Preparing a new battery
: Battery low-Replace new batteries.
Exposure compensation status mark
°§If you select exposure compensation in manual set mode on the LCD
monitor, a symbol
will appear on the camera status LCD.
¶_Refer to the user manual [exposure compensation status] page 47 about
exposure compensation status.
°§If you select exposure compensation 0, the symbol
3 2
)will appear on the
) will disappear.
will disappear.
SETTING UP THE SHOOTING FUNCTION
Indicator for the number of the remaining shot, condition of the card and other information.
°§According to the condition of the camera and memorycard, it is shown on
shot information indicator as below.
°·camera condition indicator
The Indicator (
) on shot information indicator blinks if you press the
power button.
¶_The indicator (
) is cancelled when the camera is ready for the operation.
°·
When the memory card is set up properly
The number of pictures available to take is determined by the image quality
selected and recording size.
¶_The maximum pictures available will be 9999(subject to memory size and
picture quality)
°·
When the memory card is not set up properly
(
) symbol flashes on the location of picturing available indicator.
¶_If there is no card a beep will sound.
°·
When a memory card is set and there is short capacity
symbol (
) will flash on the location of pictures available indicator.
¶_If the sound function is on, the card memory capacity short warning
sound will.
°·
When you are saving the tiff file form image in the memorycard
The
indicator blinks on the [indicator for the number of the remaining
shot].
¶_When the saving to the memorycard is completed, The
cancelled.
°·
Indicator for the camera error
When the error occurs while the operation of the camera, The indicator
on the shot information indicator blinks.
¶_Refer to the page 68 about the detail information about the occurrence of
the error.
Reference
°§When the memory capacity is low it will not be possible to take a picture.
°§A warning will sound regarding low memory or no card will sound in
the following events.
- When you have pressed the shutter button.
- When you have used mode dial.
indicator is
3 3
Advertisement
