Advertisement
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ108
H OW TO SOLVE THE PROBLEMS
¢ Ú
Check points & Solutions
1. When
TWAIN Driver is set up improperly
These problems may occur when TWAIN Driver is set up improperly or TWAIN Driver
has been already set up for another camera.
¢—Select the proper camera model on the following frame displayed when you run the
Adobe PhotoDeluxe testing version and then click [open the image and correct it ->
take the image -> camera -> 1. camera -> camera model] in this order.
2 .
When the connection between camera and PC is not proper.
¢—You will have the problems when USB cable (or RS-232C cable) is not connected
from camera to PC or you have connected another cable other than the one
provided with this camera.
3.
When camera is turned off
¢—The problems may occur when the camera is turned off or the battery doesn't have
sufficient power or the adapter is not properly connected.
4.
Other than possible reasons listed above, there may be some other Review the
system information in reasons.
There may be some problems with Serial port on PC. Control panel to check out the
status of serial port. You will see the question mark with yellow background if there is
something wrong with serial port.
¢—For more information, call A/S Center of PC manufacturer.
1 0 8
SET UP THE TWAIN DRIVER
T WAIN Dri ver Installation for Macintosh
1
Shut down all the programs before starting the installation.
2
Insert Driver CD-ROM into CD-ROM driver.
3
There are three categories in the installation of MAC TWAIN Driver.
°§Installation for TWAIN Protocol (You can skip this if your Mac already has this
i n s t a l l e d . )
°§Installation of Digimax 210SE USB TWAIN Driver
°§Installation of Digimax 210SE Serial TWAIN Driver
Installation for TWAIN Protocol
1
If your MAC already has [TWAIN Protocol] installed, you may skip this instruction.
2
You see this window when you open [MAC TWAIN
Installer] folder from Driver CD-ROM.
3
Select all the files and folders in [Into
Extentions] Folder and then, copy them into
Extentions(extension file)Folder, which is in
System Folder(korean system).
4
In the same way, select all the files and folders in [Into Preferences]
Folder and then, move them into Preferences Folder, which is in
System Folder.
5
If all process goes successfully , reboot the computer.
(FOR MAC)
1 0 9
Advertisement
