Advertisement
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ58
PLAY MODE
ERASE ALL
°§All image data which is saved in compact flash memory card is to be erased.
1
If you push ENTER button after moving a bar cursor into ERASE ALL in a
manual starting screen status, the messages like below appears on a liquid
monitor.
2
Select YES by highlighting it and then pressing ENTER.
°§All the images on the card will then be erased.
¶_The image counter will register no images.
Locked images will not be deleted.
°§AFTER selecting NO, when you push the ENTER button
¶_A manual starting screen is back and ERASE ALL of the screen is
highlighted. When deleted, the setup MENU mode is cancelled if you
press MENU.
5 8
°ÿWhilst images are being erased the
red LED will remain illuminated.
The green viewfinder LED will flash
to indicate that all images have been
erased.
°ÿNormal operation will be resumed by
either selecting a new mode using
the mode dial or when the camera is
powered down and back up.
PLAY MODE
Note
°§Erasing images will clear the memory of all information (except
locked images). You must transfer any image files that you want to
save to another medium before erasing takes place.
Reference
Erasing one cut image
: Only one cut image is deleted out of images stored in a compact
flash memory card.
1. select the image that you want to erase.
E R A S E
2. If you push STATUS /
button, the messages like below
appears on a liquid monitor.
3. After moving a bar cusor into YES or NO with up and down button,
push ENTER button.Then the action like below is executed.
¶UAfter selecting YES, when you push ENTER button
¢—After erasing image stored in a memory card, the next stored
image is displayed on a liquid monitor.
¶UAfter selecting NO, when you push ENTER button
¢—The screen comes back to the chosen image screen.
5 9
Advertisement
